Yes. The Sensory Bath Mobile upholds the most stringent safety standards (ASTM, EN71, ect’) and is IPX7 waterproof certified, ensuring the utmost safety in using battery operated products when immersed in water. Still, please follow these guidelines to ensure optimal safe use of the product:

• 1. Use 4 X AA (LR6) batteries only.

• 2. WARNNING: don’t use rechargeable batteries.

• 3. Use quality batteries of a known brand.

• 4. Make sure the battery compartment is tightly sealed after every time you change the batteries.

Yes, this product is BPA free.

This product is recommended for children ages 0-24 months. No matter what their age, you should never leave a child unattended in the bathroom or bathtub.

No, a tub is not included with this toy.

Before you can start enjoying your new bath toy, choose a battery cover that fits your tub and insert batteries. We strongly recommend using new, good quality batteries to ensure optimal operation over time. After inserting the batteries, close the compartment tightly, and connect the mobile to the bath so that the blue pump at the end of the green hose is immersed in water. Once the mobile is set up, turn it on using the bird button and control the water intensity using the orange water intensity controller on the side. When using new batteries it is recommended to start with the lowest water intensity level.

4 X AA (LR6) batteries (not included) of good quality and known brand. WARNNING: don’t use rechargeable batteries.

Attention! Before inserting the batteries, ensure the product is thoroughly dry! To insert batteries, first you must open the four screws on the battery cover (clip-on or suction cup battery cover, depending on the bathtub). Insert 4 x 1.5v AA (LR6) batteries, ensuring correct polarity. Close the compartment with the relevant battery cover and screw it into place using a Phillips head screwdriver. Before putting the mobile back in the water, make sure the battery compartment is tightly sealed.

Make sure the batteries are inserted correctly. First, dry off the product thoroughly, then follow the above instructions to verify correct polarity, insertion, and proper sealing of the battery compartment. Try operating the product once more. If it still doesn’t work, try using new batteries and clean the propeller and filter, as described below. If that too doesn’t get the water flowing, please contact our customer support center.

If you are using a baby bathtub, release the flower shaped screw on the clip on battery cover to open the clamp. Place the birdhouse inside the tub and the clamp around the edge and tighten the flower screw. If you are using a full-size bathtub, simply attach the mobile to the side of the tub using the blue suction cups battery cover.

If you are trying to attach the mobile to a tub with thick edges, make sure the birdhouse is properly positioned inside the tub and turn the flower screw clockwise to secure tightly. If you are using a thin edged tub, turn the flower screw counterclockwise to open the clamp once more. Lift up the orange lever hidden inside the clamp and place it against the outside of the tub. Reposition the birdhouse inside the tub and the clamp around the edge, then turn the flower screw clockwise to secure tightly.

You may be using the wrong battery cover for your bathtub. The cover with the yellow clamp attaches easily to most baby bathtubs, while the cover with the blue suction cups attaches to full size bathtubs.

Before pressing the power button, make sure the pump is immersed in water. To start the water flow, press on the large, orange bird button inside the birdhouse.

Slow exposure to the sprinkling water usually ensures a better bath time play experience. We recommend you turn the arc and the bird away from the baby’s body at first, and gradually introduce the water stream and sprinkles. Start by sprinkling water on the legs, and when the baby is comfortable, begin introducing the stream of water to other body parts. Slowly move the water around to learn what your baby likes best.

On the side of the birdhouse there is an orange water intensity controller with three drop sizes for setting three water flow intensity levels. Slide the controller button to set the water flow intensity and the speed of the rotating flowers to match your baby’s reactions. Gradually increase the intensity to stimulate the senses and help your baby get used to the water flow.

On the side of the birdhouse there is an orange water intensity controller with three drop sizes for setting three water flow intensity levels. Slide the controller button to set the water flow intensity and the speed of the rotating flowers to the mobile’s surroundings and avoid splashes outside the tub.

It is recommended to properly rinse, drain, and dry out the product after every use. Unless you do that, Yookidoo® bath toys will need a good cleaning every few weeks or so, in order to remain mold-free. When a thorough cleaning is required, fill up a bucket with water and add in some vinegar. Let the mobile soak in the vinegar water for around 20 minutes, then then activate it a few times to circulate the water through it. Repeat this step with clean water to wash out the vinegar. Rinse the spout off and dry using a paper or cloth towel.

• 1. Get it out of the water, shake it, put it back in the water and turn it on again.

• 2. The circulating water pump may stop working when the batteries die and when the propeller or filter are blocked by dirt, hair, or soap. To fix this, simply unscrew the filter located on the side of the blue pump at the end of the green hose, and pull it out. Wash with soap and water until the filter mesh is clean. Then make sure the propeller rotates freely. If it doesn’t, try to release whatever is causing it to be stuck with a screwdriver and clean it off until it rotates freely again. When the mobile is sparkly clean, reinsert the filter and attach the screw.

• 3. If it is still not splashing water, change the batteries and make sure to tightly close the battery compartment lid (see instructions above).

• 4. If the product still doesn’t work, please contact our customer support center.

The filter should be cleaned every time the batteries are replaced.

The battery compartment may not have been closed properly. It is very important to make sure the cover is sealed correctly. Before re-operating, unscrew the battery cover with a Phillips head screwdriver and take out the batteries. Wipe the compartment, cover, and batteries and leave to dry. Only when completely dry, insert the batteries, screw the cover tightly into place, and try to operate the product. If the mobile still doesn’t work, please contact our customer support center.

Pull the green arc out of the birdhouse, turn it sideways, and connect it to its base using the short branch for a flat and compact storage position.

The Yookidoo date code number helps us track the production date of the product. The mobile’s date code is located on the back of the blue pump at the end of the green hose. It is a five-digit number, that ends with letters.