Yes. The Stack 'N' Spray Tub Fountain upholds the most stringent safety standards (ASTM, EN71, ect’) and is IPX7 waterproof certified, ensuring the utmost safety in using battery-operated products when immersed in water. Still, please follow these guidelines to ensure optimal safe use of the product:

• 1. Use 3 X AA batteries only.

• 2. WARNNING: don’t use rechargeable batteries.

• 3. Use quality batteries of a known brand.

• 4. Make sure the battery compartment is tightly sealed after every time you change the batteries.

Yes, this product is BPA free.

This product is recommended for children ages 1-6 years. No matter what their age, you should never leave a child unattended in the bathroom or bathtub.

3 X AA batteries (not included) of good quality and a known brand are needed. WARNNING: don’t use rechargeable batteries. Do not mix old or used and new batteries, or batteries of different types. Remove batteries from the product after use or if storing for long periods.

The battery compartment is located on the underside of the fountain base.

Attention! Before inserting batteries, ensure the product is dried thoroughly! To insert batteries, unscrew the battery compartment cover (located on the underside the fountain base) with a Phillips Head screwdriver. Insert 3 X 1.5V AA (LR6) batteries, ensuring correct polarity. Replace the compartment cover and screw firmly into position (See instructions – images 1+2). Before using, make sure the battery compartment is completely sealed!

Water level should be minimum 5 inches (12 cm). Submerge the base for a few seconds at the beginning of every use to achieve optimal water flow.

To start the tub fountain, first submerge the base for a couple of seconds to achieve optimal water flow. Then, press the orange Peek-A-Boo figure located on the fountain base.

• • Red boat spins as it sprays.

• • Light blue boat has a swiveling propeller.

• • The octopus figure spouts water in all directions.

• • The scuba pal figure spouts hair as he squirts from his mouth.

No. There is no specific stacking order of the boats. There is no right or wrong.

Yes. The boats can float independently. Or they can be used as buckets - filled with water and spilled back into the tub.

It is recommended to properly rinse, drain, and dry out the product after every use. Unless you do that, Yookidoo® bath toys will need a good cleaning every two weeks or so in order to remain mold-free. When a thorough cleaning is required, fill up a bucket with water and add in some vinegar. Let the toy soak in the vinegar water for around 20 minutes, then turn it on and off a few times to circulate the water through the pump. repeat this step with clean water to wash the vinegar out. Rinse it off and dry using a paper or cloth towel.

Unscrew the filter (located on the underside of the fountain base) and pull it out. Wash with soap and water, ensuring that the filter mesh is completely open. Make sure the inner propeller is also clean and spins freely. Re-position the filter and screw in firmly.

The filter should be cleaned every time batteries are replaced.

There is a seal located on the cover, preventing water from coming into the battery compartment. Make sure, once more, that the cover is firmly screwed in place before use.

The product may stop working when the propeller or filter are blocked by dirt, hair, or soap. In order to fix this, unscrew the filter and pull it out. Wash with soap and water, ensuring that the filter mesh is completely clean. Make sure the propeller rotates freely. If it does not, try to release the clog with a screwdriver, until it rotates freely again. Reinsert filter and screw into place.

If you want to watch a tutorial: click here.
If the water is still not running, change the batteries and make sure to tightly close the battery compartment lid (see instructions above).

• 1. Verify correct polarity of batteries.

• 2. Still doesn’t work? Contact us.

• 1. Submerge the base for a few seconds allowing the pump to be filled with water – plug the water output hole with one finger for a minute.

• 2. Clean filter – clean mesh and make sure that the pump propeller spins freely.

• 3. Change batteries.

The Yookidoo date code helps us track the production date of the product. The date code of the Yookidoo Stack ‘N’ Spray Fountain is on the green base. It is made up of 5 digits and ends with letters.